MNET-BCD4020FUA4 
Axis Control Specification
- Number of axes: 4 axes (with a liner interpolation function)
- Mechanical position counter: 28 bit
- Acceleration / deceleration characteristics: Linear and S-curve
(Selectable acceleration/deceleration pattern separately)
- Positioning control range: ±134,217,728 (28-bit)
- Continuous position function using a pre-buffer
- Speed change during operation (speed overdrive)
- Target position change during operation (position overdrive)
- Home position mode: 13 kinds
Input Specification
Input: ORG/SD or PCS/±EL/EMG
Driver Specification
| Driving system |
2-phase, unipolar current driving method |
| Current level setting |
Vol (0.5A to 2.0A / phase) |
| Automatic current down |
Enable/disable(control using a PCL6143 /general-purpose output) |
| Excitation ON/OFF |
Controlled by the PCL6143 general-purpose output |
| MicroStep |
Selection from 1/1 to 1/16 using a switch |
| Power source |
24VDC (max. 3.5A 2A/phase with 4 axes driven) |
| Size |
W145*D130*H30 mm |
|
/ Chinese
